Kia Rio: Front Seat Belt / Front Seat Belt Buckle
Components and components location
1. Front seat belt buckle
|
|
Repair procedures
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Disconnect the front seat belt buckle connector wiring (A).
|
3. |
Remove the front seat belt buckle (A) loosening the mounting bolt.
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)
|
|
4. |
Install in the reverse order of removal.
•
|
Make sure that the connector is plugged in properly.
|
•
|
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Height adjust
Repair procedures
Replacement
1.
Remove the front se ...
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolts, adjust the hood (B) by
moving it up and down, or right and left.
2.
...
Other information:
Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to discriminate between an event that warrants restraint system deployment and
an event that does not. The SRSCM must decide whether to deploy the restraint sys ...
Components and components location
Components
1. Shift lever knob & boots
2. Shift lever assembly
3. Shift cable assembly
Repair procedures
Removal
1.
Place the shift lever in the "N" position.
...