Kia Rio: Maintenance / Washer fluid
Checking the washer fluid level
The reservoir is translucent so that you can check the level with a quick visual
inspection.
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
In warm climates, plain water may be used if washer fluid is not available. However,
use washer solvent with antifreeze characteristics in cold climates to prevent freezing.
WARNING - Flammable fluid
Do not allow the washer fluid to come in contact with open flames or sparks.The
windshield washer fluid reservoir is flammable under certain circumstances. This
can result in a fire.
WARNING - Coolant
- Do not use radiator coolant or antifreeze in the washer fluid reservoir.
- Radiator coolant can severely obscure visibility when sprayed on the
windshield and may cause loss of vehicle control.
WARNING - Windshield fluid
Do not drink the windshield washer fluid. The windshield washer fluid is poisonous
to humans and animals.
Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between the MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir ...
Checking the parking brake
Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone ...
Other information:
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of
the vehicle, all occupants, fuel and cargo.
This ...
Repair procedures
Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the drive belt.
(Refer to Drive Belt System - "Drive Belt" ...