Kia Rio: Maintenance / Parking brake
Checking the parking brake

Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone
should securely hold the vehicle on a fairly steep grade. If the stroke is more
or less than specified, have the parking brake adjusted by an authorized Kia dealer.
Stroke : 5~7 “clicks’’ at a force of 20 kg (44 lbs, 196 N).
Checking the washer fluid level
The reservoir is translucent so that you can check the level with a quick visual
inspection.
Check the fluid level in the washer fluid reservoir and add fluid if ...
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner compartment. Clean the
filter by using compressed air.
...
Other information:
1. Open the trunk lid.
2. Loosen the light assembly retaining screws with a cross-tip screwdriver.
3. Remove the rear combination lamp assembly from the body of the vehicle.
4. Disconnect the rear combination lamp connector.
5. Remove the socket from the assembly by turning the socket coun ...
Repair procedures
Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under cover")
2.
Drain the coolant.
(Refer to Cooling System - "Coolant")
...