Kia Rio: General Information / Lift And Support Points

Kia Rio 2017-2025 YB Service Manual / General Information / Lift And Support Points

General information
Lift And Support Points
  

When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additional weight in the luggage area before hoisting. When substantial weight is removed from the rear of the vehicle, the center of gravity may change and can cause the vehicle to tip forward on the hoist.

  

Since each tire/wheel assembly weights approximately 14kg (30lbs), placing the front wheels in the luggage area can assist with the weight distribution.

Use the same support points to support the vehicle on safety stands.

1.

Place the lift blocks under the support points as shown in the illustration.

2.

Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported.

3.

Raise the hoist to full height to inspect the lift points for secure support.

Warning And Caution Labels
General information Warning And Caution Labels 1. Fan caution 2. Radiator cap caution 3. Battery caution Battery Caution Label Warning / Cautio ...

Towing
General information Towing If the vehicle needs to be towed, call a professional towing service. Never tow a vehicle just on a rope or chain as this is extremely dangerous. E ...

Other information:

Kia Rio 2017-2025 YB Service Manual: General Service Information


General information Identification Number Locations Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work.    The support rod must be inserted into the hole near the ...

Kia Rio 2017-2025 YB Service Manual: Front Wheel Speed Sensor


Components and components location Components 1. Front wheel speed sensor connector 2. Front wheel speed sensor Repair procedures Removal 1. Remove the front wheel & tire. Tightening torque: ...

Copyright © www.krioyb.com 2017-2025