Kia Rio: User Settings Mode (for type B cluster) / Warning messages
Warning messages appear on the LCD to warn the driver. It is located in the center
of the instrument cluster.
The warning message may appear differently depending on the type of instrument
cluster and some may not show the warning message at all.
The warning message is shown in either symbol, symbol and text, or text type
only. You can choose the preferred language (for Type B only) by selecting the User
setting menu in LCD mode.
Door, hood, trunk (liftgate) open
• This warning is displayed indicating which door, the hood, or the trunk (liftgate)
is open.
Sunroof Open (if equipped)
• This warning is displayed if you turn off the engine when the sunroof is open.
Engine has overheated
This warning message illuminates when the engine coolant temperature is above
120°C (248°F). This means that the engine is overheated and may be damaged.
❈If your vehicle is overheated, refer to “Overheating” in chapter 7.
Shift to P (for smart key system and intelligent variable transmission)
- This warning message illuminates if you try to turn off the engine without
the shift lever in P (Park) position.
- At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop Button once more, it will turn to the ON position).
Low Key Battery (for smart key system)
- This warning message illuminates if the battery of the smart key is discharged
when the Engine Start/Stop Button changes to the OFF position.
Press START button while turn steering (for smart key system)
- This warning message illuminates if the steering wheel does not unlock normally
when the Engine Start/Stop Button is pressed.
- It means that you should press the Engine Start/Stop Button while turning
the steering wheel right and left.
Steering wheel unlocked (for smart key system)
• This warning message illuminates if the steering wheel does not lock when the
Engine Start/Stop Button changes to the OFF position.
Check Steering Wheel Lock System (for smart key system)
• This warning message illuminates if the steering wheel does not lock normally
when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine (for smart key system and intelligent variable
transmission)
- This warning message illuminates if the Engine Start/Stop Button changes
to the ACC position twice by pressing the button repeatedly without depressing
the brake pedal.
- It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine (for smart key system and manual transmission)
- This warning message illuminates if the Engine Start/Stop Button changes
to the ACC position twice by pressing the button repeatedly without depressing
the clutch pedal.
- It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key system)
- This warning message illuminates if the smart key is not in the vehicle
when you press the Engine Start/Stop Button.
- It means that you should always have the smart key with you.
Key not detected (for smart key system)
- This warning message illuminates if the smart key is not detected when you
press the Engine Start/Stop Button.
Press START button again (for smart key system)
- This warning message illuminates if you can not operate the Engine Start/Stop
Button when there is a problem with the Engine Start/Stop Button system.
- It means that you could start the engine by pressing the Engine Start/ Stop
Button once more.
- If the warning illuminates each time you press the Engine Start/Stop Button,
have your vehicle inspected by an authorized Kia dealer.
Press START button with smart key (for smart key system)
- This warning message illuminates if you press the Engine Start/Stop Button
while the warning message “Key not detected” is illuminating.
- At this time, the immobilizer indicator light blinks.
Check fuse “BRAKE SWITCH” (for smart key system and intelligent variable transmission)
- This warning message illuminates if the brake switch fuse is disconnected.
- It means that you should replace the fuse with a new one. If that is not
possible, you can start the engine by pressing the Engine Start/Stop Button
for 10 seconds in the ACC position.
Shift to P or N to start engine (for smart key system and intelligent variable
transmission)
• This warning message illuminates if you try to start the engine with the shift
lever not in the P (Park) or N (Neutral) position.
✽ NOTICE
You can start the engine with the shift lever in the N (Neutral) position.
But, for your safety, we recommend that you start the engine with the shift lever
in the P (Park) position.
On this mode, you can change setting of the doors, lamps, and so on.
WARNING
Do not adjust the User Settings while driving. You may lose steering control
and/or cause an accident or serious person ...
This warning light is to warn the driver the road may be icy.
When the following conditions occur, the warning light (including Outside Temperature
Gauge) blinks 5 times and then illuminates, and ...
Other information:
Repair procedures
Remove and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the adapter plate (A) and drive plate (B).
Tightening torque : ...
Components and components location
Components Location
1. Drive shasft (LH)
2. Drive shaft (RH)
[RH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. ...