Kia Rio: Engine Oil and Filter / Valve Clearance
Repair procedures
[Kappa 1.0 T-GDI]
Check the valve clearance.
If necessary, adjust the valve clearance by replacing the tappets.
Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark p ...
Repair procedures
Inspection
Vapor hose
1.
Check all the clamps for tightness and the connections for leakage.
2.
Visually check the vapor li ...
Other information:
If any method other than the CRUISE button was used to cancel cruising speed
and the system is still activated, the most recent set speed will automatically
resume when you move the lever up (to RES+).
It will not resume, however, if the vehicle speed has dropped below approximately
30 km/h ...
Repair procedures
Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the drive belt.
(Refer to Drive Belt System - "Drive Belt" ...