Kia Rio: Tire Pressure Monitoring System (TPMS - Type B) / TPMS (Tire Pressure Monitoring System) malfunction indicator
The low tire pressure telltale will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System. If
the system is able to correctly detect an underinflation warning at the same time
as system failure then it will illuminate both the TPMS malfunction and low tire
pressure position telltales e.g. if Front Left sensor fails, the TPMS malfunction
indicator illuminates, but if the Front Right, Rear Left, or Rear Right tire is
under-inflated, the low tire pressure position telltales may illuminate together
with the TPMS malfunction indicator.
Have the system checked by an authorized Kia dealer as soon as possible to determine
the cause of the problem.
- The TPMS malfunction indicator may be illuminated if the vehicle is moving
around electric power supply cables or radios transmitters such as at police
stations, government and public offices, broadcasting stations, military installations,
airports, or transmitting towers, etc. This can interfere with normal operation
of the Tire Pressure Monitoring System (TPMS).
- The TPMS malfunction indicator may be illuminated if snow chains are used
or some separate electronic devices such as notebook computer, mobile charger,
remote starter or navigation etc., are used in the vehicle. This can interfere
with normal operation of the Tire Pressure Monitoring System (TPMS).
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated,
one or more of your tires is significantly under-inflated.
If the telltale illu ...
If you have a flat tire, the Low Tire Pressure telltale will come on. Have the
flat tire repaired by an authorized Kia dealer as soon as possible or replace the
flat tire with the spare tire.
CAU ...
Other information:
Schematic diagrams
Engine Control Module (ECM)
Harness Connector
Terminal Function [M/T]
Connector [A]
Pin No.
Description
Connected to
1
Ignition coil (Cylinder #1) control output
...
Specifications
Specification
Item
Specification
Type
Hall effect sensor
Current
22 mA (Max)
Output voltage
High : 4.8 V - 5.2 V
Low : Below 0.8
...