Kia Rio: Heating and air conditioning / MAX A/C-Level (B, D)
The MAX A/C mode is used to cool the inside of the vehicle faster. Air flow is
directed toward the upper body and face.
In this mode, the air conditioning and the recirculated air position will be
selected automatically.
Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel.
Also, you can adjust the direction of air delivered from these vents using the
vent control lever as shown.
The mode selection knob controls the direction of the air flow through the ventilation
system.
Air can be directed to the floor, dashboard outlets, or windshield. Five symbols
are used to repre ...
Temperature control
The temperature control knob allows you to control the temperature of the air
flowing from the ventilation system. To change the air temperature in the passenger
compartment ...
Other information:
Repair procedures
Inspection
Automatic Transaxle
Fluid (ATF) Level Check
1.
Place the vehicle on a level ground.
2.
Start the engine to warm up the ATF.
3.
Check by using KDS/GDS that the temperature of the ATF is b ...
Repair procedures
Inspection
Multifunction Switch
Inspection
[BCM Type]
1.
Check for continuity between the terminals in each switch position as
shown below.
[Left Handle
Drive]
Switch
Switch p ...