Kia Rio: LCD windows / LCD Modes (for type B cluster)
(1) Trip Computer mode
This mode displays driving information like the tripmeter, fuel economy, and
so on.
❈ For more details, refer to “Trip Computer” in this chapter.
(2) User Setting mode
On this mode, you can change the settings of the doors, lamps and so on.
(3) Master warning mode
This mode informs of warning messages related to TPMS fail, low pressure (if
equipped) or Low engine oil (if equipped).
❈ For controlling the LCD modes, refer to “LCD window Control” in this chapter.
The vehicle will display Driving Information once per each ignition cycle.
- Fuel efficiency is calculated after the vehicle has run for more than 300 meters
(0.2 miles).
- The Driving Informati ...
Service in
It calculates and displays (in mileage or days) when you need a scheduled maintenance
service.
If the remaining mileage or time reaches 1,500 km (900 mi.) or 30 days, a “Service
in ...
Other information:
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off.
When one or more of your tires are significantly underinflated.
❈For more details, refer to “Tire Pressure ...
1. Open the trunk lid.
2. Loosen the light assembly retaining screws with a cross-tip screwdriver.
3. Remove the rear combination lamp assembly from the body of the vehicle.
4. Disconnect the rear combination lamp connector.
5. Remove the socket from the assembly by turning the socket coun ...