Kia Rio: Indicator Lights / Immobilizer Indicator Light (With Smart Key)

Kia Rio 2017-2024 YB Owners Manual / Features of your vehicle / Indicator Lights / Immobilizer Indicator Light (With Smart Key)

This indicator light illuminates for up to 30 seconds:

• When the vehicle detects the smart key in the vehicle properly while the Engine Start/Stop Button is ACC or ON.

- At this time, you can start the engine.
- The indicator light goes off after starting the engine.

This indicator light blinks for about 10 seconds:

• When the smart key is not in the vehicle.

- At this time, you cannot start the engine.

This indicator light illuminates for 2 seconds and goes off:

• When the vehicle can not detect the smart key which is in the vehicle while the Engine Start/Stop Button is ON.

In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light blinks:

• When the battery of the smart key is weak.

- At this time, you can not start the engine. However, you can start the engine if you press the Engine Start/Stop Button with the smart key. (For more details, refer to “Starting the Engine” in section 6).

• When there is a malfunction with the immobilizer system.

In this case, have your vehicle inspected by an authorized Kia dealer.

Electronic Stability Control (ESC) OFF, Immobilizer Indicator Lights
Electronic Stability Control (ESC) OFF Indicator Light This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for ...

Turn Signal Indicator Light
This indicator light blinks: • When you turn the turn signal light on. If any of the following occurs, there may be a malfunction with the turn signal system. In this case, have your vehicle i ...

Other information:

Kia Rio 2017-2024 YB Service Manual: Crach Pad Center Panel


Components and components location Component Location 1. Crash pad center lower panel Repair procedures Replacement    Put on gloves to protect your hands. ...

Kia Rio 2017-2024 YB Service Manual: Sunroof Motor


Repair procedures Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Remove the glass motor (A) after loosening the mounting ...

Copyright © www.krioyb.com 2017-2024