Kia Rio: Chassis / Drive Shafts and Boots
Repair procedures
1. |
Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks
or damage.
|
Repair procedures
Inspection
Check the pads for excessive wear, discs for run out and wear, and calipers for
fluid leakage.
Front Brake
Front brake disc thickness
chec ...
Repair procedures
Inspection
Check whether the stroke is within specification when the parking brake lever
is depressed with 44 lbf, 196 N(20 kgf) of force. Also, the parking brake alo ...
Other information:
Repair procedures
Removal and Installation
1.
Disconnect the oil pressure switch connector (A) and then remove the
oil pressure switch (B).
Tightening torque :
9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)
...
Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation.
3. ...