Kia Rio: Blower / Climate Control Air Filtar
Description and operation
The climate control air filter is located in the bower unit. It eliminates foreign
materials and odor. The particle filter performs a role as an odor filter as well
as a conventional dust filter to ensure comfortable interior environment.
Repair procedures
2. |
Remove the filter cover (A) by pressing the knob.
|
3. |
Replace the air filter (A) with a new one according to the direction
of air filter.
•
|
To remove the filter easily, press the right side inward
then pull out the filter.
|
•
|
In case of driving in an air-polluted area or rugged
terrain, check and replace the air filter as frequently
as possible.
|
|
|
4. |
Installation is the reverse order of removal.
|
Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of blower
motor. ...
Description and operation
Description
The intake actuator is located at the blower unit. It regulates the intake door
by signal from control unit. Pressing the intake selection switch ...
Other information:
Specifications
Specification
Item
Specification
Type
Normal open
Input voltage
12 V
Coil resistance
3.5 ± 0.2 Ω (at 25°C, 77°F)
Frequency
...
If any method other than the CRUISE button was used to cancel cruising speed
and the system is still activated, the most recent set speed will automatically
resume when you move the lever up (to RES+).
It will not resume, however, if the vehicle speed has dropped below approximately
30 km/h ...